Acero engineering logo white

Compressor Stations & Metering Stations

Acero handles FEED, detailed design, regulatory support, procurement and construction oversight for compressor and metering stations. Projects include raw gas & condensate compression, dehydration, metering, flare system upgrades and green‑field builds both domestically and internationally.

Domestic Projects

Wilrich 16-27 Compressor Station Expansion

Wilrich 16-27 Compressor Station Expansion FEED and Detailed Engineering

LOCATION: Central AB

Acero was responsible for expanding the Wilrich compressor station with a historic throughput of 22 MMSCFD of raw gas and condensate. The expansion was with a 48 MMSCFD train, parallel to the existing 22 MMSCFD facility; resulting in a total plant throughput capacity of 70 MMSCFD. Other facility upgrades included 3 phase inlet separators, dehydrator, new MCC building, upgrade of existing incinerator burner, one new high pressure flare stack and one new flare knockout drum.

Daiber

Daiber Compressor Station

LOCATION: Fort St. John, BC

Acero’s scope of work included the engineering, design and regulatory support of a new compressor/dehydration facility designed for 50 MMSCFD of high pressure production and 25 MMSCFD of lower pressure compression. Water storage, power generation and sales gas metering was also required.

Gas Plant Debottleneck and Expansion

Gas Plant Debottleneck and Expansion

LOCATION: Fort St. John, BC

Acero was responsible for the FEED, detailed engineering and regulatory support of a compression expansion from 28 MMSCFD to 40 MMSCFD. Other facility upgrades included flare system upgrade, power generation including generator installation, and fuel gas measurement.

Pine Creek Compressor Station

Pine Creek Compressor Station FEED

LOCATION: Edson, AB

Acero was responsible for the engineering, design and procurement of a compressor station in order to process the production of new sour wells. Plant capacity designed to handle 20-25 MMSCFD of gas with a maximum liquid yield of 100 BBL/MMSCF.

International Projects

Acordionero Gas Injection Scheme

Acordionero Gas Injection Scheme

LOCATION: Colombia, South America

Acero was responsible for the FEED through Detailed Design of Gas injection scheme of the Acordionero field. The project included installation of 2 Nos. screw booster compressors and 2 Nos. 4 stages injection compressors to inject 10 MMSCFD at 2,500 psig.

Amguri Condensate Recovery Project

Amguri Condensate Recovery Project

Location - Assam, India

Description - Acero Engineering provided comprehensive EPCM services for the successful installation of the interim Condensate Recovery Facility at the Amguri-6 site. Acero completed detailed engineering, procurement and construction oversight—to optimize hydrocarbon recovery. As part of this scope, Acero oversaw the installation and integration of major new equipment, including an Inlet Group Separator, an Inlet Test Separator, two 3,000 hp reinjection compressors (with reinjection pressures of 3,500 psig), and a vapor recovery compressor.

Acordionero Pilot Gas Injection – Pre-FEED & Detailed Design

  Acordionero Pilot Gas Injection – Pre-FEED & Detailed Design

Location: Colombia, South America

Description: From pre-FEED to Detailed Design, Acero engineered a pilot gas injection facility for the Acordionero asset. A key component of the preliminary engineering phase involved a rigorous evaluation of compressor alternatives and configurations to optimize the gas injection process, ultimately delivering a seamless and actionable design package for the pilot program.

More Acero Projects

Connect With Us Today

Connect with Acero today—where bold ideas meet trusted engineering solutions and seamless project execution.
Contact Acero
Acero Engineering logo colour

Headquarters

UAE Office

  • Main Address:
    IFZA DDP A1
    Dubai Silicon Oasis, Dubai, UAE
  • Mailing Address:
    IFZA Business Park, Building A2
    Dubai Silicon Oasis, Dubai
    PO BOX 342001
    United Arab Emirates
  • +971 50 765 3004

Follow us

©2026 Acero Engineering.
Website by SUPERUS

Rohan Balkaran

Engineering Manager

Rohan
Rohan is a results-driven, safety-focused professional engineer who brings a valuable set of skills and broad range of field experience to the design table; having worked extensively in the field (primarily in central and northern Alberta) for the better part of the past decade. Rohan has worked in conventional gas conditioning and oil processing facilities troubleshooting, de-bottlenecking, optimizing, designing, and operating. He has also managed and engineered conventional well tie-in programs.

He is enthusiastic in resolving challenges of various complexities as a member of a team, independently (as he has operated in the field), or through leadership as Engineering Manager. He brings a practical understanding of "how things are really done", to the design stage of projects; resulting in project outcomes that are technically grounded and aligned with how they are truly implemented in the field; minimizing rework, redesign, and/or redlining.

Stephen Kohlman

Electrical Engineer

Stephen Kohlman
Stephen Kohlman joined the Acero team in early 2014. He is a graduate in Electrical Engineering from the University of Calgary.

He brings with him, over 15 years of electrical engineering experience in the energy industry from various EPCM companies.

Stephen has a solid understanding and knowledge of electrical engineering CSA, IEEE and IEC procedures, standards, codes and calculations which assists him to perform daily tasks efficiently.

Stephen is the technical go-to resource at Acero for all of the standard scopes of work.

Paul Aubuchon

Lead Process Engineer

Paul Aubuchon
Paul Aubuchon has sixteen (16) years of experience in the oil and gas industry; going on six (6) years at Acero. He has been involved in all manner of typical facility projects, including specialization in oil and gas handling, processing, storage and power generation facilities.

Paul has extensive experience in conceptual and detailed engineering developing ProcessDeliverables and managing client expectations. .
Paul remains actively involved in all of Acero’s major projects and critical clients, while also, running the process department – ensuring that resources (digital and human) are available as required for all current and upcoming work.

He graduated from the University of Calgary with a B.Sc. in Chemical Engineering in 2005 and is registered with APEGA and EGBC.

Mohammad Akteruzzaman

Mechanical Lead

Mohammad Akteruzzaman
Mohammad (“Akter”) Akteruzzaman has a Master’s in Mechanical Engineering (from University of Detroit) and twenty five (25) years of Oil and Gas experience; domestic and international. For the past 10 years Akter’s experience and locale has been with Acero, executing the Mechanical aspects of all domestic and international projects. Like most of the members of the Acero team, his experience at Acero includes compressor / gas plant installations or Akter has extensive expertise in piping code such as ASME B31.3, ASME B31.4, ASME B31.8 and CSA Z662. Since 2017, Akter has become a member of the CSA Z662 technical committee.

Akter has been instrumental in completing the development of Acero’s in-house specs to include virtually every combination of piping class and substance that is common to Oil and Gas production/facilities.

Randy Unrau

Senior Technical Specialist

Randy Unrau
Randy Unrau brings over thirty-five (35) years of experience in the design, construction, modification and troubleshooting of gas processing and oil production equipment, usually in the role of Project Manager and/or Project Engineer. Randy manages certain key technical assignments, and as well, provides technical direction and resources to projects as required.

His responsibilities have included equipment procurement and sizing, development of budgets and schedules, management of engineering and mechanical teams, as well as the coordination of construction contractors and consultants, cost control, and FEED studies.

Randy received his B.Sc. Mechanical Engineering degree from the University of Calgary.

Kristy Eastwood

HR Manager

Kirsty Eastwood
Kristy Eastwood is an experienced Human Resources Manager with a demonstrated history of working in the oil & energy industry.

At Acero, since 2018, Kristy has been intimately involved in solicitation of talented technical staff, on-boarding/off-boarding, contract preparation, compensation assessments, benefits management and all other aspects associated with the management of Acero’s human capital.

Kristy works strongly with Acero’s Senior Management on a day-to-day basis.

Doug French

Manager Design / Drafting

Doug French
Doug French has over 32 years of mechanical design experience in oil & gas, LNG, and shipbuilding. His experience also includes creating Design & Drafting procedures, implementation of CADD standards, onsite field engineering, plant walk down, redlining, construction support, and start-up.

Doug is primarily focused on managing the workload, personnel, and technical resources, while also supporting design checking, ensuring that the quality of all documentation issued meets Acero’s (ISO certified) quality standards.

Ken Olshaski

Civil/Structural Engineering

Ken Olshaski
Ken Olshaski has over 29 years of experience in civil structural design and team lead management in the oil and gas industry. His experience ranges from conceptual and detailed design to involvement in the development of project studies (FEED), DBM's, project scope and specifications, budget estimates, manpower loading and scheduling.

Projects worked on include well tie-ins to oil batteries, large compressor stations to process facilities and many other brownfield and greenfield installations. Ken holds a Bachelor of Science Degree (1988) from the University of Alberta and is registered with APEGA, EGBC and APEGS.

Richard Enns

Senior Process Engineering Lead

Richard Enns
Richard Enns has over forty (40) years of experience in Oil and Gas process design and engineering. His experience includes conceptual design, detailed specification, commissioning and start-up of land-based and off-shore oil and gas production facilities, gas plants, refineries and petrochemical facilities, as well as multiphase and dense phase pipeline systems.

Richard is an expert in the handling, processing and measurement of oil and gas. Richard has completed numerous hydraulic designs, assessments and debottlenecks, etc. static and dynamic; he is an industry expert at dealing with the most challenging of process situations.

He has been published in technical journals, taught technical seminars and has contributed presentations to both clients and professional societies.

Ahmad El-Sayed

VP Projects

Ahmad El-Sayed
Ahmad El-Sayed has over 20 years of experience working for Producers, EPC’s and Vendors in the oil and gas industy. His technical background working with compressors, rotating equipment, and as an engineering technologist, has provided him the skills to understand the technical details of projects that he runs.

Ahmad has worked at Acero as a Project Manager for approximately a decade now. He has been primarily involved in facility expansions and debottlenecks, wellsite tie-in programs as well as batteries, pump and compressor station installations and/or revamps.

Ahmad has recently become Acero’s VP Projects where he manages / coordinates Acero’s Project Management resources while continuing to act as PM on special client engagements.

Rola Bittar

VP Finance & Administration

Rola Bittar
Rola Bittar joined the Acero team as the V.P of Finance & Administration in 2011. Since 2008, her experience has been in private accounting (primarily financial and managerial) within in the manufacturing, telecom and oil & gas industries.

Her current responsibilities include analyzing financial information, preparing financial reports, performing financial forecasting, transmitting and approving domestic and international payments, insuring accounts receivable and accounts payable, increasing efficiency and improving workflow through creative process improvements, and insuring Acero’s human capital. She also sets goals, business metrics and standards, comparing analyzed results to ensure departments meet their milestones. Rola has a Bachelor of Business Administration in Accounting from Mount Royal University.

John Fayad

MENA President

John Fayad
John Fayad brings to Acero a technical background as well as a Project Managerial and business acumen that stretches from the Middle East and Africa to North and South America. John spent several years as an EPC contractor in the United Arab Emirates before immigrating to Canada. At Acero, for over a decade, John has acted as Project Manager, Project Director and as well, as Acero’s VP of International Operations managing and sponsoring Acero’s work in South America, the Middle East and North Africa (MENA).

John’s experience affords him both technically and commercially awareness of all aspects of his projects. John is currently MENA President and General Manager of Acero’s Branch in the UAE. He holds a Master of Science in Mechatronics Engineering from the University of New South Wales (Sydney, Australia).

Mike Krebs

VP QHSE & Project Services

Mike Krebs
Mike Krebs has been a part of Acero since 2011. He has over 28 years of international and domestic Oil and Gas experience in both equipment fabrication and EPCM environments. As a Project Manager, Mike has spent the last 19 years managing oil and gas facility upgrades, well-site tie-ins, pipeline projects, and the design and engineering of heavy oil equipment packages and heat exchangers. With his penchant for “Quality”, Mike is not only a Senior PM at Acero, but also a Director and the VP of QHSE and Project Services. Since 2013, Mike has been responsible managing and improving the Acero Health and Safety program, consistently achieving COR audit scores above 95% year after year. Mike has also been leading the team for achieving and maintaining ISO 9001:2015 and ISO 14001:2015 certification and implementing ISO 45001:2018 into the well-established Safety Program at Acero.

Salim Zaghmout

Chief Operating Officer

Salim Zaghmout
Salim Zaghmout has been a part of the Acero team since 2011. He brings over 20 years of extensive international project engineering experience in the energy industry; from design through to and including, construction and commissioning.

Salim is technically involved in the day-to-day details of on-going project execution; whether directly dealing with clients or providing support to the senior managers.

Salim is the bridge between the frontline workers and the resources needed to allow them to most effectively execute their work.

Mark Kuppe

Chief Executive Officer

Mark Kuppe
Mark Kuppe founded Acero in 2006 and remains the Chief Executive Officer.

He has over 25 years of Oil and Gas experience in Project Engineering and Management. Mark has been involved with various sizes of projects that range from wellsite installations to facility optimizations to international EPFs, CPFs, terminals and more.

He holds a Bachelor of Science in Mechanical Engineering from the University of Alberta (1990) and is a registered member of APEGA, APEGS and APEGBC.

Mark stays involved in the day to day operations of Acero while occasionally still providing Project Management and Engineering support where needed.